RVAmerica.com Forums
 
RVAmerica ForumsRVAmerica ForumsBulletin BoardBulletin BoardGeneralGeneralFIBERGLASS DELAMINATIONFIBERGLASS DELAMINATION
Previous Previous
 
Next Next
New Post
 3/21/2015 2:30 PM
 

NEED HELP

My 99 Coachmen class C has fiberglass delamination in front of the window about 12" to 18" on each side of the overhead. It appears I will have to remove the screws on the edge seal, move the seal out of the way, peel back the fiberglass and apply some kind of adhesive between the fiberglass and the wood. The areas are clean and dry underneath so that is no problem.

Local dealer estimated six hours at $151/hour which is about double what I would pay to have it done for me (also double the time I estimate).

Does anyone have any experience with this?

New Post
 3/28/2015 7:13 PM
 
Paleface - Be sure to use an adhesive that's compatible with whatever type of insulation is in the wall. Some insulations (urethane) can be melted by solvent based adhesives, and for those a water based adhesive should be used. Good luck. - Dave
Previous Previous
 
Next Next
RVAmerica ForumsRVAmerica ForumsBulletin BoardBulletin BoardGeneralGeneralFIBERGLASS DELAMINATIONFIBERGLASS DELAMINATION

Horizon Block
Progressive Insurance